Description:

• Quick and easy installation of the entire assembly – connecting elements, thermocouples and power supplies is a matter of minutes – ready for heating!
• The built-in controller allows manual mode or programming.
• Low running costs and low cost of consumables. No gas costs and minimal insulation costs. Insulation can be used repeatedly – 40x to 50x. Elements of standard handling withstand multiple use. Low power consumption.
• Highly energy efficient preheating and annealing system.
• Even and stable heating to the desired temperature with minimal deviation. The surface of the heated part is not locally overheated more than the desired temperature as with the flame. The material surface is not carburized as when using flame heating.
• Higher safety and better working conditions for welders. Operators and welders are not exposed to open flames, hot gases, and explosion hazards when using flames. No health risks for high frequency or high output voltage operators.
• Possibility to heat parts up to 800 ° C or more without the need for water cooling and thus greater flexibility of use.
• Possibility of preheating any materials.

Advantages:

Advantages of DHC 6510R inverter heating

The DHP and DHC inverters can be used to supplement or replace conventional flame heating or induction heating, or large resistive annealing sources. The DHP and DHC inverter resistor heating sources have the following undeniable advantages, which increase their attractiveness in production, maintenance, renovation workshops, foundries, outdoor operations, etc .:

• Mobility – weight only 17 kg, small size – small welder size.
• High performance – 10.5 kW – connection of up to 4 elements with a total length of 4.5 m.
• 3 in 1 – comprehensive solution – inverter + temperature controller + answering machine *.
• Simple and fast installation.
• Intuitive and simple to use – easy to use. Controls are not significantly different from welders.
• Versatile use of preheating – for shaped, flat, circular or standard parts – even heating.

Technical Data:

Description:

Small multifunction induction heater designed for car repair shops. Enables quick and effective heating of metal parts and car bodyworks. The DHI-2 DENT enables output control and heating time setting. It is an excellent aid in repairing small and gentle dimples (SOFT DENT) and damage in car bodyworks, windscreen replacement and other applications.

Technical Data:

Description:

Its high power capacity, small dimensions and light weight make the DHI-45C INDUSTRY ideal for workshops, general repairs, production, maintenance, industry and on assemblies. Heaters are designed for use in lines and automation. A significant advantage of the DHI-45C INDUSTRY compared to other heating methods is its safety, simplicity and high speed of heating and application, particularly compared to flame heating. Moreover, the use of the DHI-45C INDUSTRY induction heater is clean and environmentally friendly.

• Higher security and better working conditions for operators. The operator is not exposed to open flame, hot gases and the risk of fire and explosion when using a flame.
• Lower personnel training costs, lower wage costs. There is no need for regular staff to work on autogenous and PB burners.
• Low operating costs and low cost of consumables. No gas costs. Low power consumption. Energy-efficient heating system.

Advantages:

• Mobility – weight only 13.5 kg, including water cooling, small dimensions – size of a small welding machine.
• Output 5,0 kVA, respectively, high loading factor.
• Easy use – burner length 2 m.
• Flexibility and ease of use – connects anywhere, power supply 1x 230 V, easy and quick preparation.
• Versatile uses of pre-heating – for shaped, flat, circular, positioned or standard components.

Technical Data:

Description:

Its high power capacity, small dimensions and light weight make the DHI-44 LKW ideal for workshops, car repair shops, general repairs, production, maintenance. A significant advantage of the DHI-44 LKW compared to other heating methods is its safety, simplicity and high speed of heating and application, particularly compared to flame heating. Moreover, the use of the DHI-44 LKW induction heater is clean and environmentally friendly.

• Higher security and better working conditions for operators. The operator is not exposed to open flame, hot gases and the risk of fire and explosion when using a flame.
• Lower personnel training costs, lower wage costs. There is no need for regular staff to work on autogenous and PB burners.
• Low operating costs and low cost of consumables. No gas costs. Low power consumption. Energy-efficient heating system.

Advantages:

• Mobility – weight only 13.5 kg, including water cooling, small dimensions – size of a small welding machine.
• Output 3.5 kVA, respectively, high loading factor.
• Easy use – burner length 2 m.
• Flexibility and ease of use – connects anywhere, power supply 1x 230 V, easy and quick preparation.
• Versatile uses of pre-heating – for shaped, flat, circular, positioned or standard components.
• Modern and affordable method of workshop heating.

Technical Data:

Description:

Thanks to its high performance, small size and low weight, the DHI-45F WORKSHOP can be used in workshops, garages, general repair, manufacturing, maintenance and industry. A significant advantage of DHI-45F WORKSHOP compared to other heating methods is the safety, simplicity and speed of heating and use, especially when compared to flame heating. Moreover, the use of DHI-45F WORKSHOP induction heating is clean and environmentally friendly.

• Higher safety and better working conditions for the operator. The operator is not exposed to open flames, hot gases, and fire and explosion hazards when using a flame.
• Lower staff training costs, lower wage costs. There is no need to train staff regularly for autogenous and PB burners.
• Low running costs and low cost of consumables. No gas costs. Low power consumption. Energy-efficient heating system.

Advantages:

• Mobility – weight only 13.5 kg including water cooling, small size – small welder size.
• Output power 5 kVA, high load factor.
• Easy to use – burner 2 m long.
• Flexibility and ease of use – connect anywhere, power up to 230 V, simple and fast to prepare.
• Versatile use of preheating – for shaped, flat, circular or standard parts.
• Modern and affordable workshop heating method.

Technical Data:

Description:

• Even and stable heating. The surface of the heated part is not locally overheated by flame more than the desired temperature as in the case of flame heating.
• Higher safety and better working conditions for the operator. The operator is not exposed to open flames, hot gases, and fire and explosion hazards when using a flame.
• Lower staff training costs, lower wage costs. There is no need to train staff regularly for autogenous and PB burners.
• Low acquisition and operating costs. Low cost of consumables. No gas costs and gas bottle rental.
• Energy-efficient heating system.
• Possibility to heat parts to 800 ° C or more.

Advantages:

Advantages of DHI-15 PKW induction heating

• Mobility – only 4.5 kg weight and small size – small welder size.
• Power – 1.5 kW, high load factor.
• Easy to handle and access – 70 cm coil connecting cable with small handle.
• Flexibility and ease of use – connect anywhere, power supply 1 × 230 V, simple and fast preparation.
• Versatile use of preheating – for shaped, flat, circular or standard parts.
• Modern and affordable workshop heating method.

Technical Data:

Description:

Small multifunction induction heater designed for car repair shops. Enables quick and effective heating of metal parts and car bodyworks. The DHI-2 DENT enables output control and heating time setting. It is an excellent aid in repairing small and gentle dimples (SOFT DENT) and damage in car bodyworks, windscreen replacement and other applications.

Technical Data:

Description:

Its high power capacity, small dimensions and light weight make the DHI-44F WORKSHOP ideal for workshops, car repair shops, general repairs, production, maintenance and industry. A significant advantage of the DHI-44F WORKSHOP compared to other heating methods is its safety, simplicity and high speed of heating and application, particularly compared to flame heating. Moreover, the use of the DHI-44F WORKSHOP induction heater is clean and environmentally friendly.

• Higher security and better working conditions for operators. The operator is not exposed to open flame, hot gases and the risk of fire and explosion when using a flame.
• Lower personnel training costs, lower wage costs. There is no need for regular staff to work on autogenous and PB burners.
• Low operating costs and low cost of consumables. No gas costs. Low power consumption. Energy-efficient heating system.

Advantages:

• Mobility – weight only 13.5 kg, including water cooling, small dimensions – size of a small welding machine.
• Output 3.5 or 4.5 kVA, respectively, high loading factor.
• Flexibility and ease of use – connects anywhere, power supply 1x 230 V, easy and quick preparation.
• Easy use – burner length 2 m.
• Versatile uses of pre-heating – for shaped, flat, circular, positioned or standard components.
• Modern and affordable method of workshop heating.

Technical Data: