PRODUCTS & SERVICES
CONTACT FOR SERVICES
Therm- X Industrial Equipments Pvt. Ltd.
Mr. Joseph Thomas (Director) A-15/18, M. I. D. C., Butibori Nagpur – 441122, Maharashtra, India
Call Us :
09764551188
Telephone :
+(91)-(7104)-265839
TIG WELDING EQUIPMENT
MACHINES | ITEM CODE:
Picotig DC
Item Code: Picotig 200 MV puls TG
Components included:
- TIG multivolt inverter welding machine
- TIG welding torch, gas-cooled, 4 m
- Mains plug, assembled,
- Pressure regulator with manometer, 15 l
- Gas hose, 2 m
Description:
- Gas-cooled DC TIG inverter welding machine
- Multivolt (MV): Can be used worldwide thanks to automatic adjustment of mains voltage (115 V/230 V)
- Electronic HF start
- TIG lift arc welding without HF
- MMA pulse welding and pulsed TIG welding up to 2 kHz
- Non-latched/latched operation
- Reduced secondary current accessible using torch trigger
- Adjustable up-slope and down-slope time
- Adjustable gas pre- and post-flow time
- MMA welding
- Adjustable hot start current and hot start time
- Adjustable Arcforce
- Antistick function
- Energy-saving thanks to high efficiency and standby function
- Portable, including shoulder strap
- 3.5 m mains supply lead with 16 A shock-proof plug
- Overvoltage protection: No damage to machine caused if inadvertently connected to 400-V mains voltage
Picotig AC/DC
Item Code: Picotig 200 AC/DC puls 5P TG
Components included:
- AC/DC TIG welding machine, portable, gas, decentral, 5-pole connection socket
- Cooling unit with centrifugal pump,
- TIG welding torch, water-cooled, 4 m
- Antifreeze for the EWM welding systems -10 °C (14 °F),
- Transport cart, assembled,
- Pressure regulator with manometer, 15 l
- Gas hose, 2 m
Description:
- Modular AC/DC TIG inverter welding machine, gas- or water-cooled
- Electronic HF start
- TIG lift arc welding without HF
- Adjustable AC waveform, sine, trapezoidal, square current
- Adjustable AC frequency between 50 Hz and 200 Hz
- Adjustable AC balance
- TIG and MMA pulse function
- Non-latched/latched operation
- Reduced secondary current accessible using torch trigger
- Adjustable up-slope and down-slope time
- Adjustable gas pre- and post-flow time
- MMA welding
- Adjustable hot start current and hot start time
- Adjustable Arcforce
- Gas-cooled or optionally water-cooled with cool 40 U31 cooling unit
- Energy-saving thanks to high efficiency and standby function
- Portable, including shoulder strap
- Trolly 35.2-2, Trolly 55-5 and Trolly 55-6 trolleys available
- 3.5 m mains supply lead with 16 A shock-proof plug
- Overvoltage protection: No damage to machine caused if inadvertently connected to 400-V mains voltage
Tetrix DC
Item Code: Tetrix 200 DC Comfort 2.0 puls 5P
Components included:
- TIG DC welding machine, portable, gas-cooled, decentral, 5-pole connection socket
- TIG welding torch, gas-cooled, 4 m
- Pressure regulator with manometer, 15 l
- Gas hose, 2 m
Description:
- Gas-cooled DC TIG inverter welding machine
- TIG welding
- Features characteristics for EWM activArc and EWM spotArc at no extra charge
- Electronic HF start
- TIG lift arc welding without HF
- TIG average value pulsing: the preset welding current is maintained at all times, so particularly suitable for welding as per welding procedure specification
- Adjustable pulse frequency and balance
- Non-latched/latched operation
- Reduced secondary current accessible using torch trigger
- Spot welding/tack function (spotArc/spotmatic)
- Adjustable up-slope and down-slope time
- Adjustable gas pre- and post-flow time
- MMA welding
- MMA average value pulsing
- Adjustable hot start current and hot start time
- Adjustable Arcforce
- Antistick function
Tetrix 351 DC
Item Code: Tetrix 351 DC Comfort 2.0 puls
Components included:
- TIG DC welding machine, mobile, water-cooled, decentral
- TIG welding torch, water-cooled, 4 m
- Coolant (-10 °C), 9.3 l,
- Antifreeze for the EWM welding systems -10 °C (14 °F),
- Mains plug, assembled,
- Completely assembled workpiece lead with clamp, 70 mm²
- Pressure regulator with manometer, 30 l
- Gas hose, 2 m
Description:
- Water-cooled DC TIG inverter welding machine
- Comfort 2.0 control, simple operation with click wheel
- TIG welding
- Features characteristics for EWM activArc and EWM spotArc at no extra charge
- Electronic HF start
- TIG lift arc welding without HF
- TIG average value pulsing: the preset welding current is maintained at all times, so particularly suitable for welding as per welding procedure specification
- TIG automated pulsing with automatic specification of required pulse parameters
- Pulsed TIG welding in Hz and kHz range up to 15 kHz
- 100 free memory locations for recurring welding tasks (JOBs)
Highlights
- Energy-saving thanks to high efficiency and standby function
- Connection capability for remote control and function torch
- Crane-liftable casing
- Optional network connectivity with ewm Xnet software via LAN or WiFi gateway
- ON 7pol (092-001826-00000) “7-pole connection socket for accessory components and/or as digital interface” required for Xnet
- PC interface for PC300 XQ software
- Excellent torch cooling, resulting in cost savings on consumables due to high-performance centrifugal pump and 12-litre water tank
Tetrix 401 Synergic FW
Item Code: Tetrix 401 Synergic FW
Components included:
- TIG DC welding machine, mobile, water-cooled, decentral
- TIG welding torch, water-cooled, 4 m
- Coolant (-10 °C), 9.3 l,
- Antifreeze for the EWM welding systems -10 °C (14 °F),
- Mains plug, assembled,
- Completely assembled workpiece lead with clamp, 70 mm²
- Pressure regulator with manometer, 30 l
- Gas hose, 2 m
Description:
- Water-cooled DC TIG inverter welding machine with one-knob Synergic operation
- Features user database for Synergic operation at no extra charge
- Simple, menu-guided selection of welding tasks from user database
- 256 pre-programmed JOBs/characteristics in the user database
- Features characteristics for EWM activArc and EWM spotArc at no extra charge
- Electronic HF start
- TIG lift arc welding without HF
- TIG automated pulsing with automatic specification of required pulse parameters
- Adjustable up-slope and down-slope time
- Adjustable gas pre- and post-flow time
- MMA welding
- MMA average value pulsing
- Adjustable hot start current and hot start time
- Adjustable Arcforce
- Antistick function
- Energy-saving thanks to high efficiency and standby function
- Connection capability for remote control and function torch
- Crane-liftable casing
- Optional network connectivity with ewm Xnet software via LAN or WiFi gateway
Tetrix 551 DC
Item Code: Tetrix 551 DC Comfort 2.0 puls
Components included:
- TIG DC welding machine, mobile, water-cooled, decentral
- TIG welding torch, water-cooled, 4 m
- Coolant (-10 °C), 9.3 l,
- Antifreeze for the EWM welding systems -10 °C (14 °F),
- Mains plug, assembled,
- Completely assembled workpiece lead with clamp, 95 mm²
- Pressure regulator with manometer, 30 l
- Gas hose, 2 m
Description:
- Water-cooled DC TIG inverter welding machine
- Comfort 2.0 control, simple operation with click wheel
- TIG welding
- Features characteristics for EWM activArc and EWM spotArc at no extra charge
- Electronic HF start
- TIG lift arc welding without HF
- TIG average value pulsing: the preset welding current is maintained at all times, so particularly suitable for welding as per welding procedure specification
- TIG automated pulsing with automatic specification of required pulse parameters
- Pulsed TIG welding in Hz and kHz range up to 15 kHz
Highlights:
- Energy-saving thanks to high efficiency and standby function
- Connection capability for remote control and function torch
- Crane-liftable casing
- Optional network connectivity with ewm Xnet software via LAN or WiFi gateway
- ON 7pol (092-001826-00000) “7-pole connection socket for accessory components and/or as digital interface” required for Xnet
- PC interface for PC300 XQ software
- Excellent torch cooling, resulting in cost savings on consumables due to high-performance centrifugal pump and 12-litre water tank
Tetrix AC/DC
Item Code: Tetrix 230 AC/DC Comfort 2.0 puls 5P TM
Components included:
- AC/DC TIG welding machine, portable, modular, decentral, 5-pole connection socket
- Cooling unit with centrifugal pump,
- TIG welding torch, water-cooled, 4 m
- Antifreeze for the EWM welding systems -10 °C (14 °F),
- Transport cart, assembled
- Pressure regulator with manometer, 15 l
- Gas hose, 2 m
Description:
- Modular AC/DC TIG inverter welding machine, gas- or water-cooled
- Comfort 2.0 control, simple operation with click wheel
- TIG welding
- Features characteristics for EWM activArc and EWM spotArc at no extra charge
- Electronic HF start
- TIG lift arc welding without HF
- Special AC welding procedure to join markedly different aluminium plates together, e.g. welding 1-mm-sheet to a 10-mm-plate
- Adjustable AC waveform, sine, trapezoidal, square current
- Adjustable AC frequency between 50 Hz and 200 Hz
- Adjustable AC balance
- TIG automated pulsing with automatic specification of required pulse parameters
- Pulsed TIG welding in Hz and kHz range up to 15 kHz
- 100 free memory locations for recurring welding tasks (JOBs)
- Non-latched/latched operation
- Reduced secondary current accessible using torch trigger
- Spot welding/tack function (spotArc/spotmatic)
- Adjustable up-slope and down-slope time
- Adjustable gas pre- and post-flow time
- MMA welding
- MMA average value pulsing
- Adjustable hot start current and hot start time
- Antistick function
Tetrix 351 AC/DC
Item Code: Tetrix 351 AC/DC Comfort 2.0 puls
Components included:
- AC/DC TIG welding machine, mobile, water-cooled, decentral
- TIG welding torch, water-cooled, 4 m
- Coolant (-20 °C), 9.3 l,
- Antifreeze for the EWM welding systems -10 °C (14 °F),
- Mains plug, assembled,
- Completely assembled workpiece lead with clamp, 70 mm²
- Pressure regulator with manometer, 30 l
- Gas hose, 2 m
Description:
- Water-cooled AC/DC TIG inverter welding machine
- Features characteristics for EWM activArc and EWM spotArc at no extra charge
- Electronic HF start
- TIG lift arc welding without HF
- Special AC welding procedure to join markedly different aluminium plates together, e.g. welding 1-mm-sheet to a 10-mm-plate
- Adjustable AC waveform, sine, trapezoidal, square current
- Adjustable AC frequency between 30 Hz and 300 Hz
- Adjustable AC balance
- TIG automated pulsing with automatic specification of required pulse parameters
Highlights:
- Energy-saving thanks to high efficiency and standby function
- Connection capability for remote control and function torch
- Crane-liftable casing
- Optional network connectivity with ewm Xnet software via LAN or WiFi gateway
- ON 7pol (092-001826-00000) “7-pole connection socket for accessory components and/or as digital interface” required for Xnet
- PC interface for PC300 XQ software
- Excellent torch cooling, resulting in cost savings on consumables due to high-performance centrifugal pump and 12-litre water tank
Tetrix 451 AC/DC
Item Code: Tetrix 451 AC/DC Smart 2.0 puls
Components included:
- AC/DC TIG welding machine, mobile, water-cooled, decentral
- TIG welding torch, water-cooled, 4 m
- Coolant (-20 °C), 9.3 l,
- Antifreeze for the EWM welding systems -10 °C (14 °F),
- Mains plug, assembled,
- Completely assembled workpiece lead with clamp, 70 mm²
- Pressure regulator with manometer, 30 l
- Gas hose, 2 m
Description:
- Water-cooled AC/DC TIG inverter welding machine
- Features characteristics for EWM activArc and EWM spotArc at no extra charge
- Electronic HF start
- TIG lift arc welding without HF
- Adjustable AC waveform, sine, trapezoidal, square current
- Adjustable AC frequency between 30 Hz and 300 Hz
- Adjustable AC balance
- Non-latched/latched operation
- Reduced secondary current accessible using torch trigger
- Spot welding/tack function (spotArc/spotmatic)
- Adjustable up-slope and down-slope time
- Adjustable gas pre- and post-flow time
Highlights:
- Energy-saving thanks to high efficiency and standby function
- Mains connection: 3 x 400 V; other mains voltages and multivolt as an option
- Connection capability for remote control and function torch
- Crane-liftable casing
- Optional network connectivity with ewm Xnet software via LAN or WiFi gateway
- ON 7pol (092-001826-00000) “7-pole connection socket for accessory components and/or as digital interface” required for Xnet
- PC interface for PC300 XQ software
- Excellent torch cooling, resulting in cost savings on consumables due to high-performance centrifugal pump and 12-litre water tank
Tetrix 551 AC/DC
Item Code: Tetrix 551 AC/DC Comfort 2.0 puls
Components included:
- AC/DC TIG welding machine, mobile, water-cooled, decentral
- TIG welding torch, water-cooled, 4 m
- Coolant (-20 °C), 9.3 l,
- Antifreeze for the EWM welding systems -10 °C (14 °F),
- Mains plug, assembled,
- Completely assembled workpiece lead with clamp, 70 mm²
- Pressure regulator with manometer, 30 l
- Gas hose, 2 m
Description:
- Water-cooled AC/DC TIG inverter welding machine
- Features characteristics for EWM activArc and EWM spotArc at no extra charge
- Electronic HF start
- TIG lift arc welding without HF
- Special AC welding procedure to join markedly different aluminium plates together, e.g. welding 1-mm-sheet to a 10-mm-plate
- Adjustable AC waveform, sine, trapezoidal, square current
- Adjustable AC frequency between 30 Hz and 300 Hz
- Adjustable AC balance
- Non-latched/latched operation
- TIG automated pulsing with automatic specification of required pulse parameters
- Pulsed TIG welding in Hz and kHz range up to 15 kHz
- 100 free memory locations for recurring welding tasks (JOBs)
Highlights:
- Energy-saving thanks to high efficiency and standby function
- Mains connection: 3 x 400 V; other mains voltages and multivolt as an option
- Connection capability for remote control and function torch
- Crane-liftable casing
- Optional network connectivity with ewm Xnet software via LAN or WiFi gateway
- ON 7pol (092-001826-00000) “7-pole connection socket for accessory components and/or as digital interface” required for Xnet
- PC interface for PC300 XQ software
- Excellent torch cooling, resulting in cost savings on consumables due to high-performance centrifugal pump and 12-litre water tank
